close
Main Categories
Categories
Filter By
Brand
1-Piece, Trunnion, Special, Resilient Seated - High Performance
19 items
10 Series Manual Ball Valve
10SMBV
Economic compact design for general industrial and chemical applications. One piece unibody design, investment cast Available in stainless steel only Reduced port 2000/1500 psi (by size) Blowout Proof Stem Threaded ends only
- USD
AS Series: PFA Lined Split Body Butterfly Valve
ASPFALSBBV
AS Series butterfly valves are PFA lined (encapsulated) for superior corrosion resistance against severe chemicals and corrosive services. Bi-directional, bubble tight shut-off Rated to 150 psi Standard 17-4PH® stem Live-loaded packing Blow out proof stem 2-piece wafer of lug bodies are epoxy coated Resilient back up liner Multiple safety seals Operating Temp: 20°F to 335°F Sizes 2-12 (CF for 14-24) These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN.
- USD
Butterfly Valve Tee Assembly
BVTAb
A-T Controls’ Butterfly Valve Tee Assemblies provide a cost-effective, alternative to a 3-way valve solution. Available for lug style butterfly valves, these unique tee assemblies can be customized to fit your application. Consult factory for valve selction and assembly options. Sizes 2 - 36 Lug style Ductile Iron body Various seat options for special applications
- USD
C8/CR Series: Cryogenic
C8CRCryo
Triac C8/CR Series 3-Piece Manual Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville washers, “V” ring packing and a unique primary pyramidal stem seal. This advanced sealing system provides for protection against stem leaks experienced by ordinary ball valves.
- USD
CSA Series Ball & Butterfly Valves | CSA 3.16 Certified
CSABBV
CSA 3.16 is a standard that certifies 1/4” – 8” valves with welded, flanged, or threaded ends for use in natural gas, manufactured gas, and liquefied petroleum gases that are suitable for use between -76°F to 356°F. The certified pressure range for these valves is 0–125 psig, and the maximum permissible pressure of valves installed in these applications is 187 psig. Each A-T Controls CSA 3.16 certified valve has TFM™-1600 seats installed, is production tested (seat leak tests in both directions and shell test), tagged with the date the valve was tested and CSA logo, and operation tested. The valves have been certified for service temperatures of -20°F to 149°F. A-T Controls certified 3.16:21 floating ball valves include our F88/F88C Series (1/4” - 3”), F90/F90C Series, and 6” Series 93/93C valves. A-T Controls certified High Performance Butterfly Valves include 2”, 3”, 4”, 6” and 8” Series P1S valves.
- USD
ES Series: A-T Resilient Seated Butterfly Valves
ESATRSBV
A-T Controls Butterfly Valves cover a wide range of industries from General Purpose to Chemical, Food and Beverage, Pulp and Paper, Waste Water applications and more. The product line features many choices of seat, disc and stem materials which enable you to address a wide variety of applications and media. A-T Controls Butterfly Valves are designed to comply with MSS-SP-67 and API-609 and are tested to comply with API-598 standards. They are compatible with ANSI 125/150 flanges. Square stem, Sizes up to 24 Body material is Ductile Iron (ESP) or Stainless Steel (ES) Body Wafer or Lug style, ductile iron or stainless steel Disc Nickle Plated Ductile Iron, CF8M Stainless Steel (polished option), Aluminum Bronze, Nylon Coated Ductile Iron, Undercut CF8M SST (polished option), Undercut Aluminum Bronze, and others may be available on request Seat EPDM, Buna-N, Food grade EPDM, Viton®, PTFE Stem 431 SST standard (431 SST, 17-4PH and others available) Stem Bushing FRP (Brass available)
- USD
FM Approved Assemblies
FMAA
Valve Assemblies for Liquid and Gas Shut-off Requirements Supervisory Cocks FM Approved These assemblies are FM approved for use in applications requiring protection for fuel burning equipment per FM class 7400, 7412, 7420 and 7422. The components include a spring return automated ball valve, explosion-proof limit switch and solenoid pilot valve. Assemblies feature the latest in quarter-turn automation, rack and pinion actuator design; a marked improvement from the older spring-diaphragm technology. The actuator, combined with the superior valve seating and stem seal design, provides for reliable and consistent closure when needed. These assemblies provide for a compact fuel gas safety shut-off system. Sizes 1/2 - 6, 316 SST or WCB 3-piece design with threaded, socket weld or butt weld end connections Flanged design available with ANSI Class 150 or 300 rating Manual safety cocks and automated safety shut-off valves Solenoid approved for waterproof and explosion-proof environments Valves feature patented pyramidal stem seal system
- USD
High Performance Butterfly: POWER-SEAL Series
HPBPowerSeal
POWER-SEAL High Performance Butterfly Valves ANSI/ASME Class 150 and 300 PS and P1S Series - Soft Seat design Soft seat for bubble-tight shutoff of general purpose applications. (PS soft seat material is RTFE. P1S soft seat material is G2TFE). PF and P1F Series - Firesafe seat design Primary soft seat for bubble-tight shutoff backed up by secondary 316L SST firesafe seat. Secondary firesafe seat provides Class V shutoff when primary soft seat is compromised in a fire event. (PF soft seat material is RTFE/316L SST. P1F soft seat material is G2TFE/316L SST). PM and P1M Series - Metal seat design for specialized applications 316L SST seat for Class V shutoff of high temperature applications. Standard disc with this series is 316 SST with HCr. PH and P1H Series - Metal seat design for high temperature Inconel 625 seat and 316 SST with Stellite disc is recommended for extreme temperatures. Features and Benefits Available inventory includes sizes 2”-36”. Larger sizes available upon request Standard body materials are 316 SST or WCB. Application specific options include: Alloy 20, Monel, CD3MN, Hastelloy C-276, Inconel 625, Aluminum Bronze, LCB and others. Refer to catalog for standard seat materials for each series. Application specific seat materials include: 50/50 STFE, PTFE, TFM-1600 and Inconel 625. Soft and Firesafe seat designs offer bubble-tight, bi-directional shutoff to full ANSI/ASME Class 150 and 300 standards. Metal seat design offers Class V shutoff. Blow out proof stem design Live Loaded Packing Application Specific Stem Packing Internally Cast Travel Stop These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN.
- USD
LS Series: A-T Resilient Seated Butterfly Valves
LSATRSBV
LS Series: Lined Butterfly Valve PFA lined (encapsulated) disc and PTFE seat for superior corrosion resistance against severe chemicals and corrosive services. Manual and Automated Butterfly Valves Lug or Wafer body, ANSI 125/150 flanges Bi-directional bubble tight shutoff for full pressure differential ASTM A395 DI and A351 CF8M body materials Square stems and ISO 5211 mounting pad for direct mounting
- USD
NS Series Ball and Butterfly Valves | NSF 61 & 372 Rated
NSBBV
A-T Controls’ NS Series floating ball valves and NS series butterfly valves are certified to meet the requirements of NSF 61 (Drinking Water System Components- Health Affects) and NSF 372 (Drinking Water System Components- Lead Content). This means that NS Series valves are certified for use (by Underwriters Laboratory) in water treatment, water purification, potable water, and water distribution systems and conforms with North American lead content requirements for “lead-free” plumbing. These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN. NS butterfly valves are available in sizes 2” – 24”, and have Class 150 wafer or lug flanges. (NS, NSP) NS ball valves are available with threaded, socket weld, butt weld, Class 150, and Class 300 end connections. (NS20, NS22, NS55, NS90-F1, NSD9-F1, NSD9-F3) Water Treatment | Potable Water Service | Reverse Osmosis | Desalination
- USD
NS Series Butterfly Valves | NSF 61 & 372 Rated
NSBV61
NSF 61 and 372 certified and Dead-End Service, Manual and Automated Butterfly Valves, Lug or Wafer body, ANSI 125/150 flanges (NS, NSP) A-T Controls’ NS series butterfly valves are certified to meet the requirements of NSF 61 (Drinking Water System Components- Health Affects) and NSF 372 (Drinking Water System Components- Lead Content). This means that NS Series valves are certified for use (by Underwriters Laboratory) in water treatment, water purification, potable water, and water distribution systems and conforms with North American lead content requirements for “lead-free” plumbing. Bi-directional, bubble tight shutoff for full pressure differential Vulcanized Molded rubber seat design ASTM A395 DI and A351 CF8M body materials Multiple seat and disc materials available Square stems and ISO 5211 mounting pad for direct mounting These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN.
- USD
OC/OS Series: A-T Resilient Seated Butterfly Valves
OCOSATRSBV
A-T Controls Butterfly Valves cover a wide range of industries from General Purpose to Chemical, Food and Beverage, Pulp and Paper, Waste Water applications and more. The product line features many choices of seat, disc and stem materials which enable you to address a wide variety of applications and media. A-T Controls Butterfly Valves are designed to comply with MSS-SP-67 and API-609 and are tested to comply with API-598 standards. They are compatible with ANSI 125/150 flanges. These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN. OS and OSB Series Square stem, Sizes up to 12 Body material is Ductile Iron (OSB) or Stainless Steel (OS) OC and OCB Series DD stem, Sizes 14-24 | Keyed Stem, Sizes 30-48 Body material is Ductile Iron (OCB) or Stainless Steel (OC) Trim Options Body Wafer or Lug style, ductile iron or stainless steel Disc Nickle Plated Ductile Iron, 316 Stainless Steel (polished option), Aluminum Bronze, Nylon Coated Ductile Iron, Undercut 316 SST (polished option), Undercut Aluminum Bronze, and others may be available on request Seat EPDM, Buna-N, Food grade EPDM, High temp EPDM, Viton®, PTFE Stem 420 SST standard (431 SST, 17-4PH and others available) Stem Bushing PTFE (Lubricated Bronze available) Stem Seal Buna (Viton® available)
- USD
P1 Series: Piggable
P1Piggable
This unique three piece stainless steel valve is specifically designed for pigging applications in SCH 10 pipes. The value has full SCH 10 pipe inside diameter to fascilitate the passing of a pipe pig to efficiently clean the line between various production batches. Sizes 2-4 (CF for 6) Available in 316SST Flanged or Socket Weld Ends Blowout Proof Stem w/ Dual Anti-Static Devices
- USD
Painless Stainless: Stainless Steel Ball Valve Packages
PSSSBVP
Painless Stainless automated packages include a stainless steel ball valve mounted to a TRIAC® Series S2 Stainless Steel Actuator with epoxy coated high tensile strength springs.
- USD
T5 Series: Tank Bottom
T5TB
Triac® TB Series Tank Bottom Valve features the 316SST Series 55 valve body. The 3-piece design allows for easy maintenance and assembly. The weld-in-place tank pad is of 316L SST construction and bolts directly to the valve’s center body. It can be fitted with a threaded, socket weld, butt weld or ANSI Class 150 flanged mating end.
- USD
TA-Luft: Low Emissions Ball Valves
TALuftLEBV
In March of 2007 A-T Controls received TA-Luft Low Emission certification for broad range of valves with a patented Pyramidal Stem Seal system. At that time fourteen different TRIAC series valves with the live-loaded packing system passed the TA-Luft standard that was established by the German TUV agency (Technischer Uberwachungs-Verein). Considered the world's most stringent standard on valve emissions, TU-Luft testing requires less than 1 ppm leakage through the valve stem. Fugitive valve emissions are a major environmental and economic issue for process industries. TRIAC valves can reduce fugitive emissions and lost product by 99% or more compared to legacy control valves. A-T is excited to offer such a range of valve choices to help industries in their drives to reduce emissions. The TRIAC TA-Luft certified valves employ a unique live-loaded pyramidal stem packing system. This features a patented 45° pyramidal stem and stem seal with Belleville washers and PTFE chevron style stem packing, protecting against stem leaks experienced with ordinary ball valves. The TRIAC valves also feature a patented automation pad that allows direct mounting of ISO5211-compliant actuators to eliminate the cost and fabrication of special couplings or brackets. A-T Control's product literature identifies each valve model carrying the TA-Luft certification with a green logo.
- USD
TM Series - TRUNNION Mounted Metal Seat Ball Valves
TMMSBV
TM3 – 3pc. Cast, available from 2”-24”, ANSI Class 150/300/600 Bi-directional metal seat design Metal seat hard face coatings available in Stellite®, Tungsten Carbide or Chrome Carbide Standard metal seat leakage rating is in compliance with ANSI/FCI-70-2 Class V for Stellite® seats. Class VI is standard for Tungsten Carbide and Chrome Carbide coated seats. Standard splined stem connection (6 and larger) Standard graphite stem packing design Anti-static design Fire-safe design in accordance with API 6FA Optional drain plug and body purge device available These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN.
- USD
TS Series - TRUNNION Mounted Soft Seat Ball Valves
TSSSBV
TS2 – 2pc. Cast, available from 2”-12”, ANSI Class 150/300 TS3 – 3pc. Forged, available from 2”-48”, ANSI Class 150/300/600/900/1500/2500 TSW - Welded body forged, available from 2”-36”, ANSI Class 150/300/600 Soft seat options – RTFE, Nylon, Devlon®, or PEEK Fire-safe API 607 Emergency Sealant Injections Blowout Proof Stem ISO 5211 Mounting Anti-Static Device These valves hold CRNs (Canadian Registration Numbers). Use the search bar on our site to access the CRN certificates; search CRN.
- USD
WB/W6 Series: Dual Valve Isolation
WBW6DVI
Installing an A-T Controls WB Series block and bleed valve assembly eliminates the need for isolation on well head pressure relief feed, filter skid pressure relief and dryer skid relief feed lines. This changes the dynamics of pressure relief re-certification! Eliminate the need for additional maintenance and component removal reduces down-time, and the possibilities of leakage and gasket replacement.
- USD
1 - 19 of 19
1