close
Main Categories
Categories
Filter By
Brand
Valve Automation & Actuators
15 items
Stainless Steel Rack & Pinion Actuators (SSA Series)
SSASSRPA
TRIAC® Stainless Steel Rack and Pinion Actuators offer an economical solution to harsh chemical environments and the corrosion resistant requirements of the pharmaceutical, food, beverage, pulp and paper, and petrochemical industries. Contact us for application assistance. 316 Stainless Steel body, pinion and pistons ISO5211 mounting dimensions NAMUR accessory mounting Electropolish finish Double acting and spring return Standard working temperature -20ºF to 175ºF Maximum working pressure 150 psig Permanently lubricated
- USD
SY Series: Small Steel Scotch Yoke Actuator
SYSSSYA
Steel for Outstanding Corrosion Protection Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques from 800 - 12,370 In-lbs. Double Acting Spring Return TRIAC® SY Series scotch yoke actuators by A-T Controls offer “workhorse” cycle operation. These rugged multi-purpose actuators are the compliment to the already trusted THD Series. The compact design offers options to address your quarter turn torque requirements. The SY Series is a reliable way to automate quarter turn valves and provides options for accessory mounting and manual override operation. The design is modular and allows for easy rotation choices. Simply flip the actuator to achieve clockwise (CW) or counterclockwise (CCW) operation. This design features a supported scotch yoke which is stabilized by significant body bearings for minimal wear. Various spring and pressure options allow you to achieve the torque balance you need. Increased efficiencies in this design give you the most actuator for the money. For many applications, steel is just better. These small steel scotch yoke actuators, compared to aluminum, provide better corrosion resistance in harsh environments such as marine salt water and petro-chemical applications. Additionally, surface coatings adhere better than aluminum. When your application calls for rugged and reliable valve actuation, rely on the TRIAC® SY Series
- USD
THD Series: Heavy Duty Scotch Yoke Actuator
THDHDSYA
Heavy Duty Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Available in Double Acting and Spring Return Travel adjustments ±8º for clockwise and counter-clockwise strokes Nitrile rubber piston O-rings offer excellent sealing and wear. Optional low and high temperature seals and lube are available RTFE Guide Band supports piston while providing smooth operation and extended life Extra-large, strong piston rod for long life and torque transmission NAMUR accessory mounting pads for standardized mounting of limit switches, positioners, etc. Ductile iron center body Modular design allows for installing power groups and spring cartridges so that actuators may be set up for different air pressures and for Fail Clockwise and Fail Counter-clockwise Rugged heavy-duty steel pressure cylinders chrome plated for long wear and corrosion resistance Safe, welded spring cartridges with numerous options for a broad range of air pressure conditions Alloy steel, corrosion resistant and heat-treated springs designed and manufactured for long high cycle life Steel slide block, bronze slide bearings to minimize friction and provide long cycle life (Not available on the S09 pressure group) Visual position indicator The TRIAC® heavy duty scotch yoke actuator product line offers a broad range of torques to 1,600,000 in-lbs. The THD series is designed to operate ball, butterfly, plug valves, dampers or any device that requires a quarter-turn movement for on-off or throttling service. Our standard offering is the symmetrical design yoke that delivers maximum torque at both ends of the 90º cycle. The square slide bearing with guide bar provides high cycle life and smooth stroke while minimizing wear points. Also available is a canted yoke design, which is ideal for butterfly valves in sizes C11 and larger. As with all TRIAC® actuators, our THD series is accompanied by a complete line of accessories, including jackscrew and hydraulic overrides, limit switches, solenoids and positioners. A-T Controls also offers complete mounting hardware to integrate our actuators with any quarter-turn valve, damper or louver.
- USD
TRIAC® Floor Mounted Damper Drives Available in Pneumatic or Electric Configurations
TriacFMDD
TRIAC® floor mounted damper drives are the best choice for operating dampers, vanes and fan control where high vibration, heat, extreme cold, dust and inaccessibility render direct coupling of actuators to shafts impractical. Available in pneumatic (on-off and modulating), and electric (24 VDC, 120 VAC 1-phase, 220 and 440 volt 3-phase configurations, these rugged drives combine industry proven TRIAC® pneumatic and electric actuators with our engineering expertise. The rugged frames can be ordered to dimensionally replace older drives manufactured by several previous suppliers. TRIAC® frames consist of welded steel housings with pillow block bearings, maintenance access panels, and our unique infinite position lever arms. The units are tough enough for the harshest environments found in today’s refineries, power plants, steel-making boiler rooms, water treatment facilities, pollution controls, pulp and paper industries and co-generation turbine units. Contact A-T Controls for specific drawings and specifications for your replacement or new applications.
- USD
WE/XE/SE Series: Weather Proof, Explosion Proof, & Submersible Electric Actuators
WEXESEEA
WE Series (weather-proof) and XE Series (explosion-proof) electric actuators are specially designed for quarter-turn operating applications such as Ball valves, Butterfly valves, Plug valves, Dampers and similar valve automation usages. WE Weather-proof - CSA Approved; TYPE 4 and 4X; Torques 350 - 80,000 In-lbs. XE Explosion-proof - ATEX/IECEx Certified Ex d IIB T4 Gb, IP67; Torques 500 - 25,900 In-Lbs. SE Submersible - Type 4, 4X, and 6; IP68 (10m 72hr) Models to Note: The WE-350 model is speci?cally designed to operate small size ball valves (1” and less), dampers and other quarter-turn devices. The WE-500 and XE-500 electric actuators have a compact design, ideal for use with small ball valves (2” and smaller), dampers and other quarter-turn devices. They are compact and light due to high grade aluminum alloy housing. The hard-anodizing finish on the enclosure with polyester powder coating on the exterior surface equips this actuator with high resistance to corrosion. This actuator is the clear choice when a compact, efficient electric actuator is required!
- USD
XC Series: Explosion Proof Actuator (CSA Approved)
XCEPA
CSA Certification - Class I, Division 1, Groups C, D T4 Ex d IIB T4 Gb Class I, Zone 1, AEx d IIB T4 Gb; TYPE 4, 4X, 6 and 7, IP66/IP67 The TRIAC® XC Series Actuators are CSA Certified Type 4, 4X, 6 and 7 for hazardous locations and meet UL 1203 standard. The actuators are rugged and reliable with powder coated anodized aluminum housing for use in oil, gas, chemical and power generation applications. The XC Series is a perfect match for A-T's resilient or high-performance butterfly valves and dampers because of the self-locking, double reduction worm drive and torque switches. The XC Series is also ideal for ball, plug or any rotary valve requiring automation in a hazardous location. Standard Features: Visual position indicator Torque switches (XC-01350 – XC-25900) Anti-condensation heater and thermostat Two auxiliary limit switches Self-locking gear train Manual handwheel with torque from 690 in-lbs to 25900 in-lbs Available motor voltages: 12VDC, 24VDC, 24VAC, 120VAC and 220VAC Optional proportional control Various inputs with feedback available
- USD